BEST WIKA PRESSURE GAUGES , TRANSMITTERS AND SWITCHES

Our range of WIKA Pressure Gauges / Pressure Transmitters include :

(i) WIKA 110.10.63 and WIKA 110.10.100 series MS Body Pressure Gauges : WIKA Commercial Bourdon Tube Pressure Gauge comes in MS Body with Copper Alloy measuring system. Case is Black Steel with Clear plastic Window. Dial options are 50mm (2″ Dial) / 63mm (2.5″ Dial) / 100mm (4″ Dial). This series Pressure Gauges comes in Back Connection or Bottom Connection options. Connection thread size is 1/4″ BSP Male and 3/8″ BSP Male for 4″ Dial Gauges. Accuracy for this series gauges is 2.5% of FS.

(ii) WIKA 213.53.63 and WIKA 213.53.100 series SS Body Pressure Gauges with Brass Internals and Glycerine filling : WIKA Hydraulic Bourdon Tube Pressure Gauge comes in SS Body with Copper Alloy measuring system. Case is SS with vent and Window is Clear Plastic. Dial options are 63mm (2.5″ Dial) / 100mm (4″ Dial). This series Pressure Gauges comes in Back Connection or Bottom Connection options. Connection thread size is 1/4″ BSP Male and 1/2″ BSP Male for 4″ Dial Gauges. Accuracy for this series gauges is 1.6% of FS.

(iii) WIKA 232.50.100 and WIKA 232.50.160 series FULL SS Pressure Gauges with SS Internals : WIKA Stainless Steel Pressure Gauge comes in SS Body with SS 316 L measuring system. Case is SS with vent and Window is Safety Glass. Dial options are 100mm (4″ Dial) / 160mm (6″ Dial). This series Pressure Gauges comes in Back Connection or Bottom Connection options. Connection thread size is 1/2″ BSP Male for 4″ and 6″ Dial Gauges. Accuracy for this series gauges is 1% of FS.

(iv) WIKA O-10 (T) series Pressure Transmitters : WIKA OEM Pressure Transmitter has body and wetted parts in SS 316L. It provides an output of 4-20mA. This Pressure Transmitter has 2 Wire with Power Supply of 8-30 V DC. The process Connection for this series is 1/4″ BSP (M). O-10 (T) Pressure Transmitter comes with Electrical Connector Angular Connector form A. The Linearity for this series is 0.5% of span BFSL.

(v) WIKA S-10 and WIKA S-11 series Pressure Transducers / Transmitters : WIKA Pressure Transmitter / Pressure Transducers has body and wetted parts in SS316. It provides an output of 4-20mA. This Pressure Transmitter has 2 Wire with Power Supply of 14-30 V DC. The process Connection for this series is 1/2″ BSP (M). S-10 and S-11 Pressure Transmitter comes with Electrical Connector Plug as per DIN 43650. The Accuracy for this series is 0.5% of FS.

(vi) WIKA PSD-4 series Electronic Pressure Switches : WIKA Electronic Pressure Switch provides one output Switching (PNP/NPN) 4-20mA. This Pressure Switch has 3 Wires with Power Supply of 15-35 V DC. The Process Connection for this series is 1/2″ BSP (M). WIKA PSD-4 Pressure Transmitter comes with Electrical Connection M12 x 1 (4-Pin). The Accuracy for this series is 0.5% of span

(vii) WIKA FSM-6100 series Flow Swicthes : WIKA Water Flow Switch FSM-6100 (Formerly SWITZER CM-G) is an Electromechanical design Flow Switch designed for “No Flow” detection of Water or any non-corrosive liquids, Enclosure weatherproof to IP30, Line Sizes from 25 to 150 NB

Apart from the in-stock products we also provide full range of other WIKA products through the Contact-Us option.

We also provide support in selecting the correct pressure gauge through the Pressure Gauge Selector  page.